The Canadian Transportation of Dangerous Goods (TDG) Act requires that containers holding dangerous materials be marked to show the nature of the danger. Dangerous materials are defined as any material that presents a danger to life, property or the environment under normal conditions of transport.
The TDG labeling provides quick identification of the container contents, and hazard class, in the event of an emergency or an accidental release. It also informs transportation and loading dock workers about the materials they are handling.
There are two types of markings used. In general, labels are used on small means of containment and placards are used on large means of containment. What does this mean?
A containment is the vessel, vehicle, or other container used to safely hold a dangerous material. The TDG Act divides containers into two categories:
All containers holding dangerous materials that are offered for transport, must be marked with a durable, visible, weather-resistant, and legible marking before the container is loaded for transport. In general, placards are used for large means of containment and labels are used for small means of containment.
Part 4 of the TDG Act specifies the size, content, and design of TDG labels. The specifications include:
The TDG Act categorizes dangerous materials by class. The classes identify the type of hazard such as: explosive, flammable, toxic and infectious, oxidizing, radioactive, and corrosive. Some materials may be in multiple classes, in which case there will be a primary class. The primary class is the first class identified in TDG Schedule 1 column 3. The precedence used to identify the primary class is given in the TDG Act section 2.8.
On small means of containment there must be one TDG label for the primary class, and one TDG label for each subsidiary class. If the small means of containment is inside another small means of containment, only the outer container needs to be labeled. Labels may be placed on any side of the container, except the side on which the container rests (the bottom).
There is an exception to these requirements. Containers holding class 7 materials (these are radioactive materials) must be labeled on two opposite sides of the outer container. Labels may not be placed on the side on which the container rests (the bottom).
You should be familiar with the Canadian TDG labeling requirements before shipping or transporting dangerous materials. The above is only a short summary. There are other TDG labeling requirements that apply in various situations. For example, if flammable materials are being transported by ship, the flashpoint must be displayed on the label next to the shipping name of the dangerous material. Being in complete compliance with the TDG labeling requirements is not only required by law, it is important for the safety of the people handling and transporting the dangerous materials.
Ensure you're compliant with Canadian TDG and other international regulations with our introductory International GHS Labeling Guide which touches on common labeling standards for businesses expanding globally. Download your free copy below.