Furniture giants Ashley Furniture Industries has been at the helm of machine safety conversations since OSHA fined the company $1.76M in February.
More than 1,000 worker injuries ? including multiple finger amputations ? occurred at the Wisconsin site over the past 36 months. Allegations included not training workers on safety procedures and hazards present when servicing machinery, and not equipping some of its machines with readily accessible emergency stop buttons.
Ashley disputed the allegations, claiming the company trains its employees to follow applicable lockout/tagout (LO/TO) procedures and safeguards for "minor" equipment servicing. The company responded to allegations publically stating, "Ashley strongly disagrees with each and every opinion of the agency," and has since contested the citations ? specifically when OSHA's LO/TO standard apply.
The case will now go to an independent review board, which could take up to a year to resolve, said Scott Allen, U.S. Department of Labor regional director for public affairs and media relations.
While the Ashley scandal made headlines, the citations only skim the surface of broader issues. LO/TO was one of the most violated OSHA standards, resulting in 3,117 OSHA violations in 2014. Although OSHA hasn't recorded any deaths at Ashley facilities, these minor injuries ? the pinches, cuts, and lacerations ? could just have easily lead to major amputations and even fatalities.
A total of 717 fatal work injuries occurred as a result of contact with objects and equipment in 2013, according to the most recent Bureau of Labor Statistics fatalities report. Another 105 workers were fatally injured after being caught in running equipment or machinery.
Lou Flores and his team of LO/TO technical representatives within the Washington State Department of Labor & Industries, Division of Occupational Safety and Health (DOSH) said minor injuries are always indicative of larger safety issues. When a series of minor machine accidents occur, safety managers should re-access safety training and hazard recognition.
Safety Training
Washington State DOSH technicians said the most common question regarding LO/TO is who needs to be trained, and at what level. LO/TO professionals are categorized at three levels: authorized, affected, and others.
All employees are required to recognize when energy control procedures are being used, understand the purpose of the procedure, and understand the critical importance of not attempting to start up or use equipment that has been locked/tagged out.
All affected employees must be trained on LO/TO procedures before work is performed, and businesses are encouraged to provide annual LO/TO employee training.
Hazard Recognition
Hazard recognition is an ongoing safety tool, but according to DOSH officials, most companies recognize hazards only after an injury has occurred. Leading indicator safety programs help companies address on-site issues to prevent the escalation of injuries.
Leading indicators measure the possibility of something unsafe occurring by combing data from audits, evaluations, specialty software, and worker's reports. Programs vary by facility, but effective leading indicators commonly incorporate:
While the safety program can be a huge undertaking, and is more commonly used in larger organizations likes the U.S. Army and Amazon, leading indicators give employers a larger picture of the overall safety operations in their facility.
While safety training and hazard recognition programs can improve the overall safety culture of a facility, new recordkeeping updates may also help shed light on minor machine injuries and thereby prevent amputations and even fatalities.
Before 2015, companies like Ashley weren't required to report minor injuries. Now all employers must report all work-related inpatient hospitalizations, all amputations, and all losses of an eye within 24 hours. Industry professionals like those at Washington State DOSH anticipate the record keeping updates will garner more OSHA inspections ? not necessarily citations ? into the coming year.