Facility lights, moving equipment, and machinery action it all requires electricity veining through the workplace. The industrial control panel is the heart of the workplace's energy operation. For whatever reason, labeling the electric panel is often neglected. When there is a problem with electrical equipment, it is important that workers know where to go to fix the problem efficiently and safely.
In 2016, there were 154 deaths resulting from exposure to electricity, according to the Bureau of Labor and Statistics. Injuries that are common when working with electricity relate to shock and arc flash. Employers can't completely eliminate the risks without giving up the use of electrical power. However, they can protect employees through safety best practices such as using the right personal protective equipment (PPE), lockout/tagout procedures, and up-to-date electrical equipment identification.
While the mine industry has improved safety, working with electricity has its hazards. In May, a maintenance worker at a surface mine sustained severe burns while working in an electrical panel. According to the Mine Safety and Health Administration, the worker's screwdriver came into contact with an electrical feed line. Fortunately, the man survived. The injury likely could have been avoided with proper controls in place such as de-energizing the equipment and using lockout/tagout, employing the proper PPE, and ensuring all electrical circuits and circuit breakers are identified properly before troubleshooting or performing electrical work.
Service equipment, motor control centers, panels, feeders, substations, and switchboards all should have a label on them. Proper labeling affects the safety of everyone in the facility today and even years down the road when maintenance or repairs must be performed on equipment that may be unmarked or labeled with outdated information. Industrial control panel labeling also helps during disaster response, should emergency professionals need access to facility equipment. Workplaces can save time when it is needed most by properly labeling control panels using supplies that can withstand the environment. Here are a few labeling tips:
Employees who work with high voltage need to be fully aware of job site hazards. Prior to performing or troubleshooting electrical work, properly identify electrical circuits and circuit breakers. For added safety during maintenance on electrical panels, be sure to use correctly rated, well-maintained, and job-specific PPE, such as coveralls, jackets, eye protection, insulated gloves, and insulated tools. Be sure to de-energize equipment, and add a lock and tag for security and to inform workers. Testing equipment and circuitry also helps ensure electrical circuits are de-energized prior to any work.