To connect your Kodiak Max to a network, click the Network Settings icon on the main toolbar. This utility shows the current network state and a list of any available Wi-Fi networks.
To connect to a Wi-Fi network, select the desired network from the list, and click Connect. If a password is required, you will be prompted to enter it.
To connect to an Ethernet (wired) network, make sure that your Kodiak Max is physically connected to the network using a standard Ethernet cable.
The IP address on the printer will need to be set. This can be done onboard the Kodiak Max by first pressing the Home icon, then navigating to Settings > Networking > then select the gear icon next to the slider for Ethernet.
Next, set the option for Automatic to on (moving the slider to the right, shown as an orange slider) to automatically detect the network, or to off (moving the slider to the left, displayed as a gray slider) to manually input the network information. Once the information for the network has been inputted press Save, then turn the printer off for at least 10 seconds before powering back on
.
Once the printer boots back up, navigate to the Ethernet settings menu. This menu will display the IP address as well as Gateway and Netmask for the connected network. This step is not needed when manually entering the network’s information.
If you have any questions about using your DuraLabel Kodiak Max printer, get help from DuraLabel's world-class support team by calling 800-326-9244 or visiting DuraLabel.com.