Safety Regulations

Home
>
Resources
>
Safety Regulations

OSHA

1910.144 — Defines OSHA safety color codes for marking physical hazards, including red for danger/fire protection equipment and yellow for caution.

1910.145 — Specifies requirements for accident prevention signs and tags used to identify and warn workers about workplace hazards.

1910.1201 — Requires DOT markings, placards, and labels to remain on hazardous material packages until the packaging is sufficiently cleaned and purged of potential hazards.

1926.59 — Applies OSHA Hazard Communication requirements to construction workplaces by referencing 1910.1200, including chemical classification, container labeling, Safety Data Sheets, and employee training.

1926.200 — Covers accident prevention signs and tags used on construction sites, including traffic control signs/devices and temporary hazard warnings.

ANSI Z535 Series

ANSI Z535.1 — Sets forth the technical definitions, color standards, and color tolerances for safety colors.

ANSI Z535.2 — Regulates requirements for the design, application, and use of safety signs in facilities and in the environment through consistent visual layout.

ANSI Z535.3 — Provides general criteria for the design, evaluation, and use of safety symbols to identify and warn against specific hazards and information to avoid personal injury.

ANSI Z535.4 — Delivers specifications for design, application, use, and placement of safety signs and labels on a wide variety of products.

ANSI Z535.5 — Discusses safety tags and barricade tapes, which are used only until the identified hazard is eliminated or the hazardous operation is completed.

ISO

ISO 3864-1 — Establishes safety identification colors and design principles for safety signs used in workplaces and public areas.

Guides

OSHA Labeling Quick Start Guide — Provides practical OSHA and ANSI labeling best practices for improving workplace safety and compliance.

ANSI/ASME

A13.1 – 2023 — Establishes a common system to assist in identification of fluids conveyed in piping and their characteristics.

OSHA

1910 Subpart H — Covers OSHA hazardous materials requirements for general industry, including compressed gases, flammable liquids, liquefied petroleum gases, anhydrous ammonia, process safety management, and hazardous waste operations.

NFPA

NFPA 13 — Establishes industry benchmark for design and installation of automatic fire sprinkler systems.

NFPA 14 — Provides installation requirements for standpipe and hose systems to help ensure reliable water supply during a fire emergency.

NFPA 25 — Establishes baseline for inspection, testing, and maintenance of water-based fire protection systems and piping.

ISO

ISO 14726 — Specifies main and additional colors for identifying piping systems in accordance with the content or function on board ships and marine structures.

ISO 20560-1 — Specifies safety information for overground piping systems related to pipe contents and associated hazards for accident prevention, risk reduction, and emergency response.

Industry Standards

API RP 1109 — Provides recommended practices for the permanent marking of liquid petroleum pipeline transportation facilities, including markers and signs used to identify pipeline presence and related hazards.

CGA C-7 — Provides guidance for labels and markings for compressed gases and selected liquids, including general principles and recommended minimum requirements.

Guides

Pipe Marking Quick Start Guide — Provides practical guidance for implementing ANSI/ASME-compliant pipe marking systems in industrial facilities.

Ammonia Pipe Marking Guide — Explains ammonia pipe marking requirements and identification best practices for refrigeration systems and industrial facilities.

OSHA

1910.1200 — Establishes OSHA Hazard Communication requirements for hazardous chemicals, including container labeling, Safety Data Sheets, employee training, and communication of workplace chemical hazards.

1910 Subpart Z — Covers OSHA toxic and hazardous substance requirements for general industry, including permissible exposure limits that restrict airborne exposure to hazardous chemicals.

GHS

Globally Harmonized System of Classification and Labeling of Chemicals (GHS) — Provides an international framework for classifying chemical hazards and standardizing labels, pictograms, hazard statements, precautionary statements, and Safety Data Sheets.

NFPA

NFPA 704 — Provides the standardized hazard identification diamond system used to communicate material hazards during emergency response.

WHMIS

Workplace Hazardous Materials Information System (WHMIS) — Establishes Canada’s workplace requirements for hazardous product classification, labels, Safety Data Sheets, and worker education.

Guides

HazCom Labeling Quick Start Guide — Provides practical guidance for implementing OSHA-compliant chemical labeling and hazard communication practices.

OSHA

1910.303 — Covers general electrical installation requirements, including equipment marking, ratings, disconnect identification, and working space around electrical equipment.

1910.335 — Establishes safeguards for personnel protection, including electrical protective equipment and alerting techniques.

1910.147 — Establishes Lockout/Tagout requirements for controlling hazardous energy during servicing and maintenance of machines and equipment.

1910 Subpart S — Covers OSHA electrical safety requirements for general industry, including design safety standards, safety-related work practices, maintenance, and special equipment.

NFPA

NFPA 70 — Provides the National Electrical Code (NEC) benchmark for safe electrical design, installation, and inspection to help protect people and property from electrical hazards.

NFPA 70E — Establishes requirements for safe work practices to protect personnel by reducing exposure to major electrical hazards.

NFPA 70B — Details preventive maintenance for electrical, electronic, and communication systems and equipment to help prevent equipment failures and worker injuries.

ISO

ISO 7010 — Prescribes safety signs for accident prevention, fire protection, health hazard information, and emergency evacuation.

Guides

Arc Flash Labeling Quick Start Guide — Provides practical guidance for implementing arc flash labeling requirements and improving electrical safety compliance.

Arc Flash PPE Regulations Chart — Explains NFPA 70E arc flash PPE categories and protective equipment requirements for different hazard levels.