- Home
- >
- Resources
- >
- Knowledge base
- >
- Certifications for DuraLabel Bronco
Resource Navigation
Certifications for DuraLabel Bronco
17
January,
2024
1 MINUTE READ
Overview
DuraLabel Bronco has been issued the following certifications.
FCC Compliance
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To comply with the FCC RF exposure requirements, no change to the antenna or the device is permitted. Any change to the antenna or the device could result in the device exceeding the RF exposure requirements and void the user?s authority to operate the device.
US, Canadian, and European EMC and EMI standards
This equipment has been tested and passed with the requirements relating to electromagnetic compliance based on the standard EN 300 330-2 V1.5.1 (2010-02). Per RSS-Gen, Section 8.4 this device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This includes Industry Canada (IC) certification number 9684A-DLBRONCO.
More Support Options
If you have any questions about using your DuraLabel Bronco printer, get help from DuraLabels world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
Troubleshooting LabelForge
Overview Find common troubleshooting questions and how to resolve them. If the problem is not resolved by ...
Watch NowConnect DuraLabel PRO to a PC
Overview Before you begin, connect the power supply from the DuraLabel PRO/PRO 300 printer to an electrical ...
Watch NowSafely Using Bronco Max
Learn the safest way to use your DuraLabel Bronco Max printer Overview Please review the following safety ...
Watch Now