- Home
- >
- Resources
- >
- Knowledge base
- >
- Safely Using DuraLabel Bronco
Resource Navigation
Safely Using DuraLabel Bronco
17
January,
2024
1 MINUTE READ
Overview
Please review the following safety warnings before using the printer.
Safety Warnings
- Before connecting Bronco to a power outlet, check the voltage of the power source. Bronco needs a power supply between 100 and 240 volts. Ensure that the power switch on the printer is in the OFF position.
- Only use the included power supply with the Bronco (rated for 24V/2.5A output, model WDS060240). If a replacement is needed, please contact your DuraLabel representative.
- To avoid electrical shock, DO NOT pour any liquid onto the printer or printer parts.
- Only qualified service personnel should attempt to repair the printer.
- Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.
More Support Options
If you have any questions about using your DuraLabel Bronco printer, get help from DuraLabels world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
Troubleshooting LabelForge
Overview Find common troubleshooting questions and how to resolve them. If the problem is not resolved by ...
Watch NowUsing a USB Drive in DuraLabel Toro
Overview To copy files such as images or templates onto your Toro system, load the files onto a USB flash ...
Watch NowSafely Using DuraLabel 9000
Overview Please review the following safety instructions before using the printer. Safety Instructions Before ...
Watch Now