Toro Max Cleaning | Industrial Print System

Home
>
Resources
>
Videos
>
How-To: Cleaning DuraLabel Toro Max

How-To: Cleaning DuraLabel Toro Max

Feb 08, 2024 2 MINUTE WATCH

We're diving into the world of mobile, efficient and hassle-free label printing with your new Toro Max industrial label printer. Whether you're a experienced professional or new to the world of industrial labeling, this step-by-step guide to cleaning is designed to make your label printing more productive and keep the workplace safe on-the-go!

Keep your printer's maintenance at a minimum by routinely cleaning adhesive build up.

What You'll Learn In This Video:

• Removal of Label Stock and Ribbon Cartridges: Follow our easy-to-understand instructions on how to unload label stock materials and our new ribbon cartridges from your printer in prep for cleaning.

• Cleaning Print Heads: Learn how to thoroughly clean the top print head from adhesive build up to prevent misprints.

• Cleaning Label Stock Guides: Learn how to clean the label stock print guides from adhesive buildup to ensure you get a quality print every time.

• Advanced Cleaning the Cutter and Sensor: Usually done once every 6 months. Lower down the front cover to clean cutter front to back. Caution! Be careful for the sharp cutter as it will be exposed during this process.

Cleaning Tip:

We used a 4" Cleaning Swab (with 99% Isopropyl Alcohol). You can use comparable substitutes such as alcohol pads, cotton swabs or a clean towel with isopropyl alcohol.

Timestamps:

0:00 Introduction to the Toro Max

0:09 Power Down Your Printer

0:16 Remove Ribbon Cartridges

0:19 Remove Label Stock

0:26 Cleaning Ribbon Cartridge Print Head

0:31 Clean Label Stock Guides

0:40 Cleaning Cutter (Front & Back)

0:45 Load Ribbon Cartridge & Label Stock

0:59 Print and Outro

Additional Resources:

• Toro Max Supplies