- Home
- >
- Resources
- >
- Knowledge base
- >
- Certifications for DuraLabel Kodiak | DuraLabel
Resource Navigation
- Get to Know DuraLabel Kodiak
- Safely Using DuraLabel Kodiak
- Set Up a Label in LabelForge
- Additional Options in LabelForge PRO
- Connect DuraLabel Kodiak to a PC | DuraLabel
- Labeling Software for DuraLabel Kodiak
- Create Arc Flash Labels in LabelForge PRO
- Add Content to a Design in LabelForge
- Create NFPA/RTK Labels in LabelForge PRO
- Loading Supplies in DuraLabel Kodiak
- Navigating DuraSuite
- Auto Update Content in LabelForge
Certifications for DuraLabel Kodiak | DuraLabel
17
January,
2024
2 MINUTE READ
Overview
DuraLabel Kodiak has been issued the following certifications.
Radio Compliance
UNITED STATES FCC
This equipment has been tested and found to comply with the limits of a Class A digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with instructions may cause harmful interference to radio communications. Changes and modifications could void the user?s authority to operate this equipment.
INDUSTRY CANADA
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le pr?sent appareil est conforme aux CNR d?Industrie Canada applicables aux appareils radio exempts de licence. L?exploitation est autoris?e aux deux conditions suivantes: (1) l?appareil ne doit pas produire de brouillage; (2) l?appareil doit accepter tout brouillage radio?lectrique subi, m?me si le brouillage est susceptible d?en compromettre le fonctionnement.
Standard Conformity
Kodiak conforms to the following US, Canadian and European Radio, Safety, and EMC standards.
US/CANADA
FCC 15.107:2017 Class A, FCC 15.109:2017 Class A, FCC 15.109(g):2017 Class A, FCC 15.207:2017, FCC 15.225:2017, ICES-003:2016 updated April 2017 Class A, RSS-210:2016
EUROPE
EN 300 330 V2.1.1:2017, EN 301 489-3 V2.1.1:2016, EN 55032:2012/AC:2013 CLASS A, EN 55024:2010, EN 61000-3-2:2014, EN 61000-3-3:2013.
The product herewith complies with the requirements of Radio Equipment Directive (RED) 2014/53/EU, Low Voltage Directive 2006/95/EC, EMC Directive 2014/30/EU, and WEEE and ROHS Directive 2002/95/EC.
SAFETY
EN 60950-1:2006, IEC 60950-1:2005 (2nd Edition)
Radio Intentionally Emitting Radio Waves:
- frequency band(s) in which the radio equipment operates: 13.56 MHz
- maximum radio-frequency power transmitted in the frequency band(s) in which the radio equipment operates: -17.2dBuA/m
More Support Options
If you have any questions about using your DuraLabel Kodiak printer, get help from DuraLabel? world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We?re here to help with all your labeling needs!
RELATED RESOURCES
Certifications for DuraLabel Kodiak Max
FCC This equipment has been tested and found to comply with the limits for a CLASS A digital device, under ...
Watch NowCleaning DuraLabel Kodiak | DuraLabel
Overview Cleaning Inside Kodiak Cleaning the Cutter More Support Options Overview Periodic cleaning will help ...
Watch NowConnect DuraLabel Kodiak to a PC | DuraLabel
Overview Initial Setup and Driver Installation More Support Options
Watch Now