- Home
- >
- Resources
- >
- Knowledge base
- >
- Connect DuraLabel Kodiak to a PC
Resource Navigation
- Auto Update Content in LabelForge
- Navigating DuraSuite Software
- Additional Functions in DuraLabel Kodiak
- Loading Supplies in DuraLabel Kodiak
- Create NFPA/RTK Labels in LabelForge PRO
- Add Content to a Design in LabelForge
- Create Arc Flash Labels in LabelForge PRO | DuraLabel
- Labeling Software for DuraLabel Kodiak | DuraLabel
- Connect DuraLabel Kodiak to a PC
- Additional Options in LabelForge PRO | DuraLabel
- Safely Using DuraLabel Kodiak
- Get to Know DuraLabel Kodiak
- Safely Using Your DuraLabel Kodiak
- Manipulating Content in LabelForge
- Create Labels in DuraLabel Kodiak
- Create Chemical Labels in LabelForge PRO | DuraLabel
- Create Pipe Markers in LabelForge PRO
- Create Arc Flash Labels in DuraLabel Kodiak | DuraLabel
- Create Pipe Markers in DuraSuite | DuraLabel
- Create Pipe Markers in DuraLabel Kodiak
- Create Arc Flash Labels in DuraLabel Kodiak
- Create NFPA Labels in DuraLabel Kodiak
Connect DuraLabel Kodiak to a PC
27
June,
2023
1 MINUTE READ
Overview
Kodiak's built-in touchscreen allows you to create signs and labels even without a computer, but you can also connect Kodiak to a computer (optional) for additional versatility.
NOTE: You will need administrator privileges to install a driver.
Initial Setup and Driver Installation
When connecting Kodiak to a computer for the first time, follow these steps.
- Connect Kodiak's power cable to an electrical outlet and connect the USB cable from the USB-B port on the back of your Kodiak (near the power switch) to a USB-A port on your computer. Turn on your Kodiak using the power switch on the back of the printer.
- Insert the DuraLabel Kodiak Installation CD into your computer's CD drive. When the DuraLabel Kodiak startup screen appears, choose Install Driver. (To continue without a CD drive, or for updated software in the future, you can also download the software at GraphicProducts.com/support.)
- Accept the license agreement and click Next.
- Choose an installation directory; by default, this will be "C:\Program Files (x86)\DuraLabel Kodiak." Then, click Next.
- Review the installation details and click Finish to install the driver. You will see a progress bar as the software is installed.
You will be prompted to restart your computer to complete installation. Save any work before restarting.
More Support Options
If you have any questions about using your DuraLabel Kodiak printer, get help from DuraLabel' world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
Troubleshooting DuraLabel Kodiak
Overview If something seems to be wrong with your DuraLabel Kodiak, refer to the solutions below. If the ...
Watch NowCleaning DuraLabel Kodiak
Overview Periodic cleaning will help prevent jams, and keep your Kodiak running smoothly. If specks, spots, ...
Watch NowLoading Supplies in DuraLabel Kodiak
Overview To load your Kodiak with supplies, raise the hinged lid. The lid will hold at the fully raised ...
Watch Now