- Home
- >
- Resources
- >
- Knowledge base
- >
- Safely Using DuraLabel Kodiak
Resource Navigation
- Auto Update Content in LabelForge
- Navigating DuraSuite Software
- Additional Functions in DuraLabel Kodiak
- Loading Supplies in DuraLabel Kodiak
- Create NFPA/RTK Labels in LabelForge PRO
- Add Content to a Design in LabelForge
- Create Arc Flash Labels in LabelForge PRO | DuraLabel
- Labeling Software for DuraLabel Kodiak | DuraLabel
- Connect DuraLabel Kodiak to a PC
- Additional Options in LabelForge PRO | DuraLabel
- Safely Using DuraLabel Kodiak
- Get to Know DuraLabel Kodiak
- Safely Using Your DuraLabel Kodiak
- Manipulating Content in LabelForge
- Create Labels in DuraLabel Kodiak
- Create Chemical Labels in LabelForge PRO | DuraLabel
- Create Pipe Markers in LabelForge PRO
- Create Arc Flash Labels in DuraLabel Kodiak | DuraLabel
- Create Pipe Markers in DuraSuite | DuraLabel
- Create Pipe Markers in DuraLabel Kodiak
- Create Arc Flash Labels in DuraLabel Kodiak
- Create NFPA Labels in DuraLabel Kodiak
Safely Using DuraLabel Kodiak
26
June,
2023
1 MINUTE READ
Overview
Please review the following safety instructions before using the printer.
Safety Instructions
- Kodiak is intended for indoor use only. Keep the printer away from humidity and prolonged exposure to direct sunlight.
- Disconnect the printer from its power source when not in use.
- Do not pour liquids onto the printer or printer parts. For ordinary cleaning, follow the instructions included in the User Guide.
- Only qualified service personnel should attempt to repair the printer.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
In addition, to prevent damage to Kodiak and to avoid nullifying the Kodiak warranty, please follow these rules:
- Only use official Kodiak supplies from Graphic Products in your Kodiak printer.
- Read all instructions in the User Guide
More Support Options
If you have any questions about using your DuraLabel Kodiak printer, get help from DuraLabel' world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
Create Arc Flash Labels in DuraLabel Kodiak | DuraLabel
Article Contents Overview Arc Flash Module More Support Options Overview The Arc Flash module uses a ...
Watch NowCreate Pipe Markers in DuraLabel Kodiak
Overview The Pipe Marking module uses the recommendations of the ANSI/ASME A13.1 standard to create simple ...
Watch NowCreate NFPA Labels in DuraLabel Kodiak
Overview The NFPA/RTK module uses a searchable, editable database of chemical information to make ...
Watch Now