- Home
- >
- Resources
- >
- Knowledge base
- >
- Install the Battery in DuraLabel Toro Max
Resource Navigation
Install the Battery in DuraLabel Toro Max
17
January,
2024
1 MINUTE READ
Overview
Toro Max's battery is an optional accessory. The Lithium-Ion (Li-ion) battery lets you design and print labels on the go, even without an AC power supply. Typically, a fully charged battery will allow for up to 3 hours of use in the field.
Battery Loading
The battery mounts into the back of the Toro Max. Remove the battery cover door by pushing the slider downward and pulling the door away. Position the battery so the cut-outs are aligned and the contacts are in position with the contact interface. Push the battery in until it locks into place, and return the battery cover door to its position.
Charging the Battery
The Toro Max battery charges automatically while it is loaded into the printer and the system is plugged in with its AC Adapter. Charging will continue whether the system is powered on or off, and will stop automatically when the battery is fully charged. No separate charger is needed, and the battery does not need to be removed from the system. The battery can usually be fully recharged in about three hours.
Battery Maintenance
Because Lithium batteries self-discharge over time, it is recommended that you fully recharge the battery at least once every three months. When the battery is not in use, keep it in a cool, dry place, away from heat or direct sunlight. Do not disassemble your Toro battery. Do not let the metal battery pins come into contact with another metal surface. If you notice any unusual odor, leakage, or swelling in the Toro battery, discontinue use and contact your DuraLabel representative.
Older Batteries
If you have a battery for the original DuraLabel Toro system, do not use it in the Toro Max, as the older battery was designed to use a separate charging system. Contact your DuraLabel representative for more information.
More Support Options
If you have any questions about using your DuraLabel Toro Max printer, get help from DuraLabel' world-class support team by calling 800-788-5572 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
Install the Battery in DuraLabel Toro
Overview Toro?s battery is an optional accessory. The Lithium-Ion (Li-ion) battery lets you design and print ...
Watch NowInstall the Battery in DuraLabel Lobo
Overview The included Lithium-ion battery can power Lobo for up to 3 hours of continuous printing, or several ...
Watch NowTouchscreen Calibration in DuraLabel Toro
Overview Your Toro touchscreen may need to be calibrated occasionally to improve touch performance. How to ...
Watch Now