- Home
- >
- Resources
- >
- Knowledge base
- >
- Safely Using DuraLabel Kodiak Max
Resource Navigation
Safely Using DuraLabel Kodiak Max
20
February,
2024
1 MINUTE READ
Safety Instructions
Please review the following safety instructions before using the printer:
- Kodiak Max is intended for indoor use only. Keep the printer away from extreme humidity (>85%) and prolonged exposure to direct sunlight.
- Disconnect the printer from its power source when not in use.
- Do not pour liquids onto the printer or printer parts. For ordinary cleaning, follow the instructions included in this guide.
- Only qualified service personnel should attempt to repair the printer.
- Kodiak Max supply may build a small static charge during loading or use. Do not operate near flammable materials.
- Never attempt to move or lift the printer by yourself; a two-person lift is required.
NOTE: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
In addition, to prevent damage to Kodiak Max and to avoid nullifying the Kodiak warranty, please follow these rules:
- Only use official DuraLabel supplies in your Kodiak Max printer.
- Read all instructions in the User Guide
More Support Options
If you have any questions about using your DuraLabel Kodiak Max printer, get help from DuraLabel's world-class support team by calling 800-326-9244 or visiting DuraLabel.com. We're here to help with all your labeling needs!
RELATED RESOURCES
System Utilities for DuraLabel Kodiak Max
These utilities are used for advanced functions or system troubleshooting and can be found in the Utilities ...
Watch NowNetwork Settings for DuraLabel Kodiak Max
To connect your Kodiak Max to a network, click the Network Settings icon on the main toolbar. This utility ...
Watch NowLoading Supplies in DuraLabel Kodiak Max
To load your Kodiak Max with supply, fully raise the printer’s lid. The supply is the base material for your ...
Watch Now